420M Portable
$0.00
This powerful little machine was designed specifically to be durable yet as lightweight as possible. At 23 in. wide, 62 in. tall (folded), and weighing less than 425 lb., the 420M can be manually lifted and carried to remote sampling locations. It can also be deployed to hard-to-reach and narrow sampling locations. The 420M is powered by a remote hydraulic power source which easily attaches to the machine or by using the auxiliary hydraulics from other Geoprobe machines. Download E-SPECS SHEET #1 (PDF) Download E-SPECS SHEET #2 (PDF)
540MT Portable
$0.00
The 540MT provides extra flexibility other Geoprobe 54-series machines do not. It's great for low overhead situations inside buildings and basements. The probe is telescoping so you can work inside with overhead 8.2 inch ceilings and still collect 4 foot samples using the full capacity of the 54-inch stroke. The power source works outside the building or basement and is independent of the Geoprobe itself. Large soft tires minimizes potential impact to lawns. We provide a special designed enclosed trailer which includes loading and unloading winch, shelving, storage compartments and exhaust vent for the power source. Download E-SPEC SHEET (PDF)...
54LT Track
$0.00
The Geoprobe® Model 54LT Track is a rugged, compact probing machine designed for tight spaces and rough terrain. It's one of our most popular rentals because it is narrow enough to fit through a standard 36-inch doorway. Excellent for accessing confined, enclosed places a vehicle-mounted unit can't get to. It's easy to use and mobilize to your job site. Ask about special 1-Day Rental Packages with this machine. Download E-SPEC SHEET (PDF)
54TR Tractor
$0.00
The Model 54TR has the popular Geoprobe® 5400 series probe machine mounted to a Model 4115 John Deere, four-wheel-drive, off-road tractor. This machine is small and compact. It easily moves about your job site with its rubber tires. Designed for sampling activities, such as pipeline and refinery work where high volume, shallow sampling is common, the Model 54TR is a solid, dependable machine. We've rented it to customers working within a Rail Road track region and deep into brush and hill terrain. Download E-SPEC SHEET (PDF)
6712-DT Track
$0.00
The Geoprobe® Model 6712DT is one of our newest direct push machines, smaller than the 7822DT, but combining similar strength. It's a narrow 52 inches in width and folds to 84.5 inches allowing it to fit in tight locations where the 7822 may not. Weighing in at 5,900 lbs the 6712DT is much lighter for transport then the 7822. It's easy to use and packs a punch using the GH63 Hammer with Single Speed Bi-directional Rotation. It also has the advantage to be easily disassembled into 3 pieces for transport to remote, hard to access locations, giving this machine the ability to be Heli-Portable....
7822-DT Track
$0.00
More Power and Options, Compact Size The Geoprobe® Model 7822DT is a high capacity direct push machine with a narrow platform for limited access areas and a sufficient stroke for added work space under the hammer. This machine showcases hammer improvements, a redesigned operator-friendly control panel with auxiliary hydraulics thumb-dial controls, a faster operating winch speed, an oscillation feature and the Geoprobe® Drop Rack System previously available only with the 8040DT machine. DOWNLOAD PDF SPEC SHEET
Drop Hammer
$0.00
Use a Geoprobe® DH-Series Automatic Drop Hammer with your hollow stem augers or with the specially designed dual tube system by Geoprobe Systems®. We rent this only with our 7822 machines. Download PDF Spec Sheet
GS1000 Grout Pump
$0.00
The GS1000 Grout Machine was developed for use with direct push equipment to deliver a sealing material (grout) to the bottom of a small diameter probe hole. Because it delivers high pressures (up to 1000 psi) you can inject 20 plus percent bentonite slurries or neat cement grouts through .375 in. OD by .25 in. ID tubing. The GS1000 is extensively used to inject bioremediation enhancing fluids such as ORC. (Oxygen Release Compound) Download E-SPEC SHEET (PDF)
Manual Slide Hammer
$0.00
A manual alternative to hydraulic driven machines. Reach tight spots while providing a low cost option to collect soil, soil gas and groundwater samples. Designed for sampling depths less than 20 ft. The small diameter 2 ft. Large Bore sampler is the recommended method to collect soil using the slide hammer but 2 ft. and 3 ft. Macro Core samplers are available. Grab groundwater samples quickly from shallow water tables using 1" rods, expendable points and Geoprobe's stainless steel mini-bailer or peristaltic pump. Choose from 15, 30 or 45 lb hammers. Download E-SPEC SHEET (PDF)
Tooling & Sampling Systems
$0.00
We rent numerous tooling and sampling systems when you lease one of our machines. Each package is designed, engineered and tested by Geoprobe Systems. We currently have 1.00, 1.25, 1.5, 2.25 and 3.25 inch rod systems, including rod grips for all those rod combinations. Manual Sampling System (1.25 inch based). We also offer LB Soil Samplers, MC5 Soil Sampling System, discrete and open Marco-core Soil Sampling System, Dual Tube System (DT22 & 325), SPT Soil Sampling System, Soil Gas Vapor PRT Systems, Groundwater SP15 and SP16, Mill Slot Samplers, Pavement Cutting Systems GH-40/GH-60, HSA 4.25 and 6.25 inch auger systems....
